DataPacket Signal
A DataPacket Signal allows you to efficiently transfer structured data. Instead of sending individual values through multiple signals, a single data packet can contain multiple fields and values.
DataPacket Signal can be used between Visual Components and ROS2.
Typical use cases:
- Sensor data exchange
- Robot status information
- Command data
- Mobile robot telemetry
Properties
| Name | Description |
| Name | Defines the name of the signal. |
| AutomaticReset | Defines if the signal is reset to its initial value when you reset a simulation. A True value resets the signal. A False value does not reset the signal. |
| PacketType | Defines the packet schema associated with the signal. Built-in packet types are available for common use cases, and custom packet types can also be defined. |
| Connections | Defines a list of behaviors that are connected to the signal. Connected behaviors can publish or receive Data Packet information through the signal. |
A Data Packet Signal uses a packet schema to define the fields available in each packet. The schema ensures that both the sender and receiver interpret the packet contents consistently. Visual Components 5.2 includes built-in packet types for mobile robot and ROS2 workflows, including velocity commands, odometry, IMU, joint state, and laser scan data. Custom packet types are also supported.